A wall shelf frees up floor space and keeps things within reach: books in a living room, spices in a kitchen, toiletries in a bathroom, boxes in a garage. How well it holds depends mainly on two things: the type of wall and the choice of fixings. On Helplease, you describe your shelf and your wall, and the workers offering this service in Norfolk Island are notified of your request.
Depending on what you agree with the worker, the job can include measuring, marking out and levelling, drilling, choosing and fitting wall plugs, assembling a flat-pack shelf, and cleaning up drilling dust. Whether the shelf or fixings are supplied should be stated in your request.
Concrete, solid brick, hollow brick and plasterboard are not drilled or plugged in the same way. An unsuitable wall plug is the main reason shelves pull away from the wall. If you do not know what your wall is made of, say so: the worker can check it on site.
A few decorative items, a row of books or tableware do not call for the same fixings. Mention what you plan to put on the shelf and its length: this guides the number of brackets and the type of plugs.
Before drilling near a socket, a switch or a water point, you need to make sure that no electrical conduit or pipe runs where the holes will go. Mention these elements in your request.
Above a desk, a worktop or a bed, the height must leave comfortable clearance. A precise description of the location helps prepare the job.
The rate is agreed with the worker based on these elements.
Usually you provide the shelf. The plugs supplied with a kit do not suit every wall: say in your request if you would like the worker to bring suitable fixings.
Yes, with plugs designed for hollow walls. The load it can carry remains lower than on a masonry wall; for heavy loads, it is better to fix the brackets into the stud frame or onto a solid wall.
It depends on the model, its depth and the wall. Some concealed fixings are designed for heavy loads, others for decoration. Check the load stated by the manufacturer and mention the intended use.
Yes, if it is included in your request. Say whether the shelf comes flat-packed so that assembly is taken into account.
The number and dimensions of the shelves, the wall type if known, the expected load, the desired height and a description of the location.
A window that does not close properly, lets in draughts or gets stuck quickly becomes a nuisance: noise, cold air, dust, rainwater or home security. In many cases an adjustment or a replacement part is enough, without changing the whole window. On Helplease, you describe the problem and the type of window, and the workers offering this service in Norfolk Island are notified of your request.
Depending on the diagnosis and what you agree with the worker: adjusting the sashes, cleaning and lubricating mechanisms, replacing the handle, espagnolette, hinges or rollers, replacing seals, resealing around the frame, and small repairs on timber. The parts needed depend on the brand and model; who supplies them is agreed with the worker.
Each material has its own hardware and adjustments. A swollen timber window may need light planing or sanding; an aluminium or PVC window is mostly adjusted at the hinges and keeps.
When the frame is badly warped, rotten or cracked, repair may no longer make sense. The worker can tell you whether replacement is more reasonable; making a new window falls under other services in the catalogue.
If the glass itself is cracked or broken, replacing it falls under the dedicated glass replacement service.
State the floor and the access, especially if the window can only be worked on from outside.
The rate is agreed with the worker based on these elements.
Not necessarily. A sash that rubs or no longer closes is often fixed by adjusting the hinges or replacing a part of the mechanism.
That is to be agreed. Some parts are standard, others depend on the model. Giving the brand or describing the hardware helps prepare the job.
Generally yes: cleaning the track, replacing the rollers or adjusting the sash height, depending on the cause.
Yes. Replacing seals and redoing the silicone are among the most common window repairs.
The material, the opening type, the number of windows, a precise description of the fault, the brand if you know it, and the floor and access.
A yellowed, stained or simply dull ceiling changes the light in the whole room. Yet it is one of the most tiring painting jobs to do yourself: arms raised, spatter, lap marks that show up in low-angle light. On Helplease, you describe the room and the condition of the ceiling, and the workers offering this service in Norfolk Island are notified of your request.
Depending on the condition of the surface and what you agree with the worker, the job can include:
Matt paint is often chosen for ceilings because it hides small imperfections better. In a kitchen or bathroom, a paint suited to humid rooms is preferable. Say whether you supply the paint or whether the worker should buy it.
A water stain often bleeds through a single coat of paint. It needs a suitable stain-blocking primer and, above all, the leak must be repaired first. If there is mould, mention it.
Mouldings, cornices or carved plaster require more careful work and should be mentioned in your request.
Above a standard height, a stepladder is no longer enough and a mobile scaffold may be needed. Give the approximate height.
The rate is agreed with the worker based on these elements.
It makes things easier. Otherwise, furniture is gathered in the middle and covered. Say whether the room will be empty or furnished.
Two coats are usual for an even finish. A new or stained surface also needs a primer.
Yes, once the leak is repaired and the surface is dry, using a suitable primer so the stain does not come back.
Either option is possible. If you buy it yourself, give the brand and colour; otherwise, agree on the type of paint with the worker.
Yes, if it is included in your request. For a whole room, the interior painting service may be more suitable.
Tiles are a durable, easy-to-clean finish for floors and walls. Getting them right depends on details: a flat substrate, a suitable adhesive, even joints and clean cuts around obstacles. This service suits tiling a room or an area; a dedicated service exists in the catalogue for large surfaces. On Helplease, you describe your project and the workers offering this service in Norfolk Island are notified of your request.
Depending on what you agree with the worker, the job can include preparing the substrate, setting out the layout, applying adhesive, laying, cutting, grouting, fitting trims and cleaning.
A floor or wall must be clean, sound and flat. Old tiles can sometimes be tiled over, but not always; a cracked or uneven substrate needs preparation, or even removal of the old covering.
Large formats, mosaics, thick tiles or natural stone are not laid the same way. Give the size and material of the tiles in your request.
In a shower or bathroom, waterproofing under the tiles and the choice of grout are essential to prevent leaks.
The rate is agreed with the worker based on these elements.
Not always. If the old tiles are firmly bonded and flat, tiling over them can be considered with a suitable adhesive; otherwise removal is preferable.
Usually the client, to choose the model. Allow extra for cuts and breakage, and say whether adhesive and grout should be supplied.
Yes, provided identical or very similar tiles are available. Give their number and location.
It depends on the adhesive and grout used; the worker will tell you the drying time to respect.
A blind that will not come down, a roller shutter stuck halfway or a strap that snaps, and suddenly you can no longer control light, heat or privacy in the room. Most of these faults can be repaired without replacing the whole unit. On Helplease, you describe the type of blind and the problem, and the workers offering this service in Norfolk Island are notified of your request.
Depending on the diagnosis and what you agree with the worker, the job can include replacing the strap, cord, reel or gear, replacing slats, adjusting the curtain and end stops, cleaning the guide rails, or checking a motor and its control. Supply of parts is to be agreed.
Many roller shutter repairs are done through the box above the window. Say whether it is inside or outside, and which floor.
A fault on a motorised shutter may come from the motor, the control or the power supply. Give the brand if you know it, and whether the motor makes a noise or stays silent.
If the curtain is badly damaged or the mechanism is worn out, the worker can tell you whether replacement is more reasonable.
The rate is agreed with the worker based on these elements.
No. Replacing a strap, sometimes with its reel, is one of the most common repairs.
Avoid forcing the strap or crank, as this can make the fault worse. Describe the situation in your request.
That is a different type of job; mention it in your request so the worker can tell you what they can take on.
The type of blind or shutter, its approximate width, how it is operated, the fault observed, the brand if known, and the floor and access to the box.
Wood is everywhere in a home: doors, cupboards, drawers, skirting boards, stairs, built-in furniture. Over time and with moisture, it swells, splits or comes unstuck, and fittings work loose. These small defects can often be fixed in a single visit. On Helplease, you describe what needs repairing and the workers offering this service in Norfolk Island are notified of your request.
Depending on what you agree with the worker, the job can include planing, sanding, regluing, replacing screws, hinges or runners, filling, and touching up the finish on the repaired area.
This service covers limited repairs. Fully restoring a piece of furniture, varnishing a whole surface or custom joinery fall under other services in the catalogue.
A touch-up on varnished, painted or stained wood may remain slightly visible. State the existing finish and your expectations.
Wood that swells regularly often points to a moisture problem; planing fixes the symptom, not the cause.
The rate is agreed with the worker based on these elements.
Yes, and it is often more practical. List them all in your request.
Wood swells with humidity. Adjusting the hinges or light planing may be enough; mention that the problem is seasonal.
Generally yes: the hole is reinforced or filled, then the hinge is refixed, sometimes slightly offset.
That is to be agreed. Give the size or brand of the existing parts to make replacement easier.
A crack in a wall or ceiling is unsightly and often comes back after a simple coat of paint. Properly sealed, it disappears for good under the finish. This service covers surface cracks in render, plaster or partitions. On Helplease, you describe the crack and the workers offering this service in Norfolk Island are notified of your request.
Depending on what you agree with the worker, the job can include opening up the crack to remove loose material, removing dust, applying a suitable filler, fitting reinforcing tape if needed, sanding and leaving a surface ready to paint. Whether the area or the whole wall is then painted should be specified.
A wide crack that runs through the wall, widens over time or forms a stepped pattern in masonry may indicate a structural problem. It is not a matter of simple sealing: a structural crack repair service exists in the catalogue, and suitable professional advice may be needed.
A crack with damp marks, blistering or efflorescence requires the cause to be treated first, otherwise it will come back.
Some cracks move with temperature changes. A flexible filler or reinforcing mesh tape limits their return.
The rate is agreed with the worker based on these elements.
No, the crack usually comes back. It needs to be opened up, filled and sanded before painting.
After filling and painting, it usually cannot be seen. Without repainting, the filled area remains visible.
If it is wide, goes through the wall, is getting bigger or doors have started to stick, mention it: sealing alone will not be enough.
The number of cracks, their approximate length and width, their location, any signs of moisture, and whether you want repainting.
Not every small job around the house fits a category: a seal to redo, an accessory to fix, a handle to tighten, a small fitting to finish. This service lets you freely describe a handyman need that does not match any other service in the catalogue. On Helplease, you explain the job and the workers offering this service in Norfolk Island are notified of your request.
Before choosing this service, check whether a more specific service already exists in the catalogue, such as shelf installation, small woodwork repairs or crack sealing: your request will then be clearer.
Because this service is open-ended, the quality of the description makes all the difference. Specify:
The rate is agreed with the worker based on these elements.
Yes. List them clearly in your request so the worker can assess the whole job.
It is better to choose that more specific service: it is aimed at the workers who selected it in their profile.
That is to be agreed with the worker. Say what you already have and what is missing.
No. For renovation, masonry, electrical or plumbing work, choose the dedicated services in the catalogue.
Choose the service that matches your needs, or keep the one already selected from this page.
Answer the questionnaire, add the details of your request and enter the exact address, then confirm.
Workers who have selected this service in their profile receive a notification.
Describe your need and receive proposals in under 30 minutes.
Request a free quote